Activated carbon canister control valve, single valve, Audi EA888 2.0T

Key Selling Points

1. Specialized for specific vehicles
2. Reduced maintenance costs
3. Easy replacement (no decoder installation required)
4. Durable materials
5. Improved fuel economy, lowering actual fuel consumption

Description

材料（Material）：Polypropylene (PP)
颜色（Color）：black
电压（Voltage）: 12V
插头针数（Plug Pins）：2-pin connector
安装位置（Installation Location）：Fuel tank ventilation pipe
包装类型（Packaging type）：
电子产品是否需要编程或匹配(Programming or matching required)：YES

OE / Replacement Numbers

06M906517E 06M 906 517 E

Interchange Part Numbers

VAICO:V10-9512
vika:99061831101

Installation Notes

Volkswagen/Audi: After installation, use a diagnostic tester to activate the solenoid valve's basic settings; otherwise, fault code P0441 will be displayed.

Sealing Test
Start the engine and spray the cleaning agent to test the pipe connections. If there are no bubbles or seepage, the test is acceptable.

Functional Verification
After warming up and idling:
Disconnect the control valve plug. The engine speed should fluctuate (the valve closure causes a change in the mixture).
Connect a diagnostic tester and read the duty cycle signal (normal range: 10%-90%).

Environmental Testing
After the road test, scan the OBD system to confirm that there are no P0455/P0442 (large/small leak) fault codes.

Fatal Error Avoidance:

Do not disassemble the vehicle without releasing fuel pressure! High-pressure steam can spray and injure people.

Do not use sealant to replace the original seals; dislodging the sealant can clog the fuel line.

Operation Tips: Cleanliness is the foundation, alignment is precise, tighten gently, and the procedure is closed.